Hazard Symbol

Danger Symbols

Danger symbols are used for the labeling hazardous substances after the Ordinance on
Hazardous Substances.

The Ordinance on Hazardous Substances is a regulation to safeguard versus hazardous
substances and comprises primarily the field of occupational safety. The directions of the
Ordinance on Hazardous Substances for the classification, packing, and labeling of chemicals
are valid for all fields and areas and apply, therefore, also for environmental and consumer
protection and human health.


The term Hazardous Substances is a generic name and is defined after the §19/2 of the
Chemicals Law as
• Dangerous substances or formulations after §3a of the Chemicals Law,
• Substances, formulations, and products they may form or release dangerous substances or
formulations during their production or use,
• Explosive substances, formulations, and products.
Following are some definitions to better understand these legal issues:
• Substances are chemical elements or compounds how they occur in nature or produced in
a synthetic way (e.g., asbestos, bromine, ethanol, lead, etc.).
• Formulations are blends, mixtures, or solutions of two or more substances (e.g., diluting
agents, paints, formaldehyde solutions, galvanic bathes).
• Products are substances or formulations which obtained a specific shape, surface, or form
during the production process. These properties determine the function of the products
more than their chemical composition (e.g., nickel containing welding electrodes, pine
wood shelves, plastic tanks).

Hazardous substances defined above posses one or more properties marked with danger
symbols.

Danger symbols are pictograms containing black signs on orange background. Danger
categories for substances and formulations marked with danger symbols are subdivided in
• Risks of fire and explosion (physical-chemical properties),
• Health risks (toxicological properties), or
• Combination of these both.
Following, all danger symbols including their danger notation and code letters are explained.
(Note: Code letters are not part of the danger symbols.)

Inflammable Substances

Inflammable substances comprise the sub-groups explosive substances, oxidizing substances,
extremely flammable substances, and highly flammable substances. Flammable substances
belong also to the category of inflammable substances, but the use of a danger symbol is not
necessary for these substances.

Explosive



Code Letter: E
Substances and formulations marked with the danger notation “explosive” can explode by hit,
friction, heating, fire, and other ignition sources even without atmospheric oxygen. Explosion
will be triggered by a vigorous reaction of the substance. High energy is released thereby
along with propagation of shock waves. The risk of explosion can be determined after the
methods given in the Law for Explosive Substances.
In the laboratory mixtures of strongly oxidizing compounds with flammable or reducing
substances can be explosive. For instance, fuming nitric acid reacts with an explosion with
solvents like acetone, diethylether, ethanol, etc. Production or working with explosives
necessitates particular knowledge and practical experiences as well as special safety
measures. While working with these substances the quantities must be kept small for ahndling
as well as for stockpiling.
The main R-Phrases for explosive substances are R1, R2, and R3.
An example for the above described properties is 2,4,6-trinitro toluene (TNT).

Oxidizing



Code Letter: O
Substances and formulations marked with the danger notation “oxidizing” are usually not
combustible. But in contact with combustible or highly flammable substances they can
increase the risk and the violence of a fire significantly. In many cases they are salt-like
inorganic substances with strongly oxidizing properties and organic peroxides.
The main R-Phrases for oxidizing substances are R7, R8, and R9.
Examples for the above described properties are potassium chlorate and potassium
permanganate, but also concentrated nitric acid.

Extremely Flammable






Code Letter: F+
Substances and formulations marked with the danger notation “extremely flammable” have as
liquids a very low ignition points (below 0 °C) and low boiling points resp. initial boiling
points (below + 35 °C). Extremely flammable gaseous substances easily form with air an
explosive mixture under normal conditions.
The main R-Phrase for extremely flammable substances is R12.
Examples for the above described properties are diethylether (liquids) and hydrogen resp.
propane (gases).

Highly Flammable



Code Letter: F
Substances and formulations marked with the danger notation “highly flammable” are subject
for self-heating and ignition under usual atmospheric conditions, or they have low ignition
points (below + 21 °C). Some highly flammable substances produce extremely flammable
gases under the influence of humidity. Substances they may heat up in air at room
temperature without additional energy supply and finally ignite are also labeled as “highly
flammable”.
The main R-Phrase for highly flammable substances is R11.
Examples for the above described properties are acetone and sodium metal, which are
regularly used in laboratories as solvent resp. drying agent.

Flammable

Code Letter: not given
There is no danger symbol needed in order to label substances and formulations with the
danger notation “flammable”. Liquid substances and formulations having an ignition point
between + 21 °C and + 55 °C are categorized as “flammable”.
The main R-Phrase for flammable substances is R10.
An example for the above described properties is oil of turpentine.

Substances Hazardous to Health

The categorization of substances and formulations according to their toxicological properties
comprises acute and long-term effects independent whether these effects are caused from one
single, repeated, or long-term exposition. An important parameter to assess the acute toxicity
of a substance is its LD50 value determined in animal experiments. The LD50 value reflects the
lethal dose in mg per kg body weight which would cause the death of 50% of the test animals
within 14 days after one single administration. Due to the test design one distinguish between
LD50 oral (p. o. = per os) uptake and digestion through the gastrointestinal system, and LD50
dermal in case of uptake through the skin. Besides these both there exists also a lethal
concentration LC50 pulmonary (inhalation). It reflects the concentration of a pollutant in air
(mg/L) which would cause death of 50% of the test animals within 14 days after an exposition
of four hours.
The term “substances hazardous to health” includes the sub-groups “very toxic substances”,
“toxic substances”, and “harmful substances”.

Very Toxic



Code Letter: T+

Substances and formulations marked with the danger notation “very toxic” can cause
significant acute or chronicle health damages and even death at very low concentrations if
taken up by inhalation, ingestion, or in contact with the skin.
A substance is categorized as vey toxic if the following criteria of the Ordinance on
Hazardous Substances are fulfilled:

LD50 oral (rat) ≤ 25 mg/kg b.w. (b.w. = body weight)
LD50 dermal (rat or rabbit) ≤ 50 mg/kg b.w.
LC50 pulmonary (rat) for aerosols/dusts ≤ 0.25 mg/L
LC50 pulmonary (rat) for gases/vapors ≤ 0.50 mg/L

The main R-Phrases for very toxic substances are R26, R27, and R28.
Examples for the above described properties are potassium cyanide, hydrogen sulphide,
nitrobenzene, and atropine (the naturally produced alkaloid in deadly nightshade).


Toxic



Code Letter: T
Substances and formulations marked with the danger notation “toxic” can cause acute or
chronicle health damages and even death at low concentrations if taken up by inhalation,
ingestion, or in contact with the skin.
A substance is categorized as toxic if the following criteria of the Ordinance on Hazardous
Substances are fulfilled:

LD50 oral (rat) 25 – 200 mg/kg b.w.
LD50 dermal (rat or rabbit) 50 – 400 mg/kg b.w.
LC50 pulmonary (rat) for aerosols/dusts 0.25 – 1 mg/L
LC50 pulmonary (rat) for gases/vapors 0.50 – 2 mg/L

The main R-Phrases for toxic substances are R23, R24, and R25.

Substances and formulations having the properties

carcinogenic (main R-Phrases: R45 and R40),
mutagenic (main R-Phrase: R47),
toxic for reproduction (main R-Phrases: R46 and R40), or
other chronically damaging properties (main R-Phrase: R48)

are marked with the danger symbol for “toxic substances” and the code letter T.
Carcinogenic substances can cause cancer or increase the cancer incidence if taken up by
inhalation, ingestion, or in contact with the skin.
Examples for the above described properties are solvents like methanol (toxic) and benzene
(toxic, carcinogenic).

Harmful






Code Letter: Xn
Substances and formulations marked with the danger notation “harmful” have a moderate risk
of health damages if taken up by inhalation, ingestion, or in contact with the skin.
A substance is categorized as harmful if the following criteria of the Ordinance on Hazardous
Substances are fulfilled:

LD50 oral (rat) 200 – 2000 mg/kg b.w.
LD50 dermal (rat or rabbit) 400 – 2000 mg/kg b.w.
LC50 pulmonary (rat) for aerosols/dusts 1 – 5 mg/L
LC50 pulmonary (rat) for gases/vapors 2 – 20 mg/L

The main R-Phrases for harmful substances are R20, R21, and R22.
Substances and formulations having the properties

carcinogenic (main R-Phrases: R45 and R40),
mutagenic (main R-Phrase: R47),
toxic for reproduction (main R-Phrases: R46 and R40), or
other chronically damaging properties (main R-Phrase: R48)

which are not notated as toxic, will be marked with the danger symbol for “harmful
substances” and the code letter Xn.

Further substances, which are
suspected to have carcinogenic properties,
will also be marked with the danger symbol for “harmful substances” and the code letter Xn.
 
Sensitizing substances (main R-Phrases: R42 and R43)
are labeled according to their spectrum of effects either with the danger symbol for “harmful
substances” and the code letter Xn or with the danger symbol for “irritant substances” and the
code letter Xi.
Substances suspected to have carcinogenic properties can cause cancer with high probability
if taken up by inhalation, ingestion, or in contact with the skin.
Examples for the above described properties are solvents like 1,2-ethane-1,2-diol = ethylene
glycol = glycol (harmful) and dichloromethane (harmful, suspected to be carcinogenic).

Tissue Destroying Substances
The term “tissue destroying substances” includes the sub-groups “corrosive substances” and
“irritant substances”.

Corrosive



Code Letter: C
Substances and formulations with the damage notation “corrosive” destroy living tissues. If a
substance destroys the healthy and intact skin of test animals in its whole thickness or this
property is predictable due to the chemical characteristics of the test substances, e.g., acids
(pH < 2) and bases (pH > 11.5), then it will be marked as corrosive.
7
The main R-Phrases for corrosive substances are R34 and R35.
Examples for the above described properties are mineral acids like hydrochloric acid and
sulfuric acid as well as bases like sodium hydroxide solutions (caustic-soda solutions) (>
2%).

Irritant



Code Letter: Xi
Substances and formulations with the damage notation “irritant” are not corrosive. But they
can cause inflammation in contact with skin or mucous membranes.
The main R-Phrases for irritant substances are R36, R37, R38, and R41.
Examples for the above described properties are isopropyl amine, calcium chloride and
diluted acids and bases.

Dangerous for the Environment Code Letter: N
 
Dangerous for the Environment



Code Letter: N
Substances and formulations with the damage notation “dangerous for the environment” can
cause immediate or delayed adverse effects on one or more environmental compartments
(water, soil, air, plants, micro organisms) and lead to ecological disturbances.
The main R-Phrases for environmentally hazardous substances are R50, R51, R52, and R53.
Examples for the above described properties are tributyl tin chloride, tetrachloro methane,
and petroleum hydrocarbons like pentane and petroleum benzine.

sumber : materi PGMIPA BI